Sokkia SET610

Sokkia SET610 Total Station

You are bidding on used Sokkia SET610 total station with 6" angle accuracy and dual compensator on V&H axis to compensate tilt error in any directions. Data transfer to a personal computer or any data collectors is possible with the RS-232C interface, and also memory on board can store up 8000 points, which will save you the purchase of data collectors. Unit has a detachable tribrach for convenience of moving it to different set up locations. If you are interested in a specific brand or model please let us know since with over 500 total stations in stock there is a good chance we have it in stock so we can list it on eBay for you. Please note actual accessory items, which come with unit, is what it says in auction list not what appear in pictures.

Item Specifications:

Magnification: 30X

Image: Erect

Minimum focusing distance: 1.0m/3.3"

Angle accuracy: 6"/1.9 mgon

Angle minimum display reading: 1"/5"

Angle reading system: One-side reading

Angle units: Switchable between meter or feet, angle degrees or gon

Distance measurement: 

A: Average conditions: slight haze, visibility about 20 km (12 miles), sunny periods, weak scintillation.

G: Good conditions: no haze, visibility about 40 km (25 miles), overcast, no scintillation.

Distance measurement to target sheet RS90N-K: 2m to 120m (390ft.)

Distance minimum display: 1mm/0.003ft

Display: Single

Data input/output: RS-232C compatible, asynchronous serial

Internal memory: Surveying data + coordinates data total 10,000 points

Compensator: Liquid dual axis

Compensating range/Accuracy: ±3’/0.3�

Optical plummet: Image: Erect, Magnification: 3x, Minimum focus: 0.3 m (0.99 ft.)

Weight: 5.2kg, 11.4lbs including tribrach and battery

Auction Includes: 

 Sokkia SET610 Total station

 Sokkia Tribrach

 Sokkia Battery

 Battery Charger

 Original carrying case

 Owner's Manual

This unit will be cleaned and calibrated for 8 calibrations points (V&H collimation, Double centering, Optical Plummet, line of sight, plunge, tilt sensor, bubbles, cross hair) in our service department prior to shipping. All batteries will be checked out to confirm that they have at least more than half-life otherwise will be re-celled. EDM will be base line tested to make sure it is reading good distances according to their specs. All these adjustments and calibrations are provided to all customers at no extra charge. Units will leave here in a good cosmetic condition as well. In other word any unit shipped out to customers is basically ready to work at field.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Continue